Everything you need to know about demolishing a load-bearing wall
When considering a home renovation, especially when looking to open up spaces, one of the most recurrent doubts is whether to knocking down a master wall or load bearing is a viable option. This process may seem simple, but it has major implications for the building structure and the overall safety of the space. To better understand this issue, we will rely on the experience of Javier Fariñas, architect and director of the architecture area from ICA-Grupo, who will provide technical insight on how to undertake such renovations safely.
What is a master or load-bearing wall?
In technical terms, a master wall and a load-bearing wall are the same thing. Both are walls that form part of the building's main structure, supporting the weight of the floors and other upper elements. Identifying a load-bearing wall is relatively easy if you observe that it is thicker than partition walls and has other structural elements resting on it.
These walls are fundamental to the stability of the building, and any modification or demolition must be carried out under strict technical supervision to avoid serious problems to the structure.
Is it possible to knock down a master wall?
The short answer is yes, a master wall can be knocked down, but not without a thorough technical analysis. It is not possible to act on a load-bearing wall without compromising the structure of the building, unless appropriate solutions are implemented.
How to know if you are facing a load-bearing wall
Identify a load-bearing wall or master wall is crucial before any type of renovation intervention. These walls are essential for the stability of the building, as they support the weight of overhead structures such as ceilings, floors and other walls. Knocking down a load-bearing wall unknowingly could seriously compromise the safety of the building. Javier Fariñas, architect of ICA-Grupo, shares some key indicators to recognise if a wall is load-bearing:
Indicators to know if a wall is load-bearing:
Thicker than other walls: The load-bearing walls are usually thicker than partition or non-structural walls. While non load-bearing walls have a standard thickness of about 7 to 10 cm, load-bearing walls, on the other hand, are wider, ranging from 15 cm to 30 cm thick. In the case of historic buildings, in many cases, partition walls, although not designed as structural walls, have been loaded by the deformation of the floor slab above and thus become load-bearing walls. Particular care must be taken when working on walls in historic buildings.
Beam or slab support: A clear sign of a load-bearing wall is the fact that it is supported by the joists or beams forming the floor slab.
Building material: Load-bearing walls are usually constructed with more resistant ceramic pieces (solid) than the dividing walls.
Confirmation by technical study: Although these indicators can help you to make a first visual assessment, the only way to be absolutely sure that a wall is load-bearing is through a technical survey. An architect or technical architect can conduct a more detailed evaluation using the building's structural plans or an on-site inspection.
How do you bring down a load-bearing wall safely?
Demolishing a master wall without compromising the structure of the building is a process which requires technical supervision and planning. Javier Fariñas mentions that the steps to bring down a load-bearing wall safely include:
- Wall identification and analysis: Confirm that it is a master wall by visual inspection and testing, if necessary.
- Structural survey: Placement of metal beams to replace the load-bearing wall, allowing loads to be distributed to the structural elements below.
- Continuous technical supervision: The process must be permanently supervised by an architect or technical architect who verifies the correct execution of the shoring.
Alternatives to the demolition of a master wall
Instead of completely removing a load-bearing wall, there are alternatives that can facilitate the redistribution of space without compromising safety. Javier Fariñas mentions that one of the most common options is the Partial culling, which consists of opening up parts of the wall while reinforcing the areas with beams or pillars. This solution makes it possible to gain amplitude without eliminating the entire load-bearing structure.
Some common options for modifying the layout of the space include:
- Partial clearance: Controlled openings in the wall with structural reinforcements.
- Metal beams: Laying of beams to partially replace the master wall functions.
These alternatives are ideal when you are looking to enlarge spaces but do not want to incur the costs and complexities of knocking down a master wall completely.
Permits and licences required to demolish a master wall
Knocking down a master wall not only requires technical planning, but also compliance with a number of regulations and obtaining the necessary corresponding administrative permits. Javier Fariñas stresses that the necessary formalities vary from municipality to municipality in which the work is carried out, as each municipality has its own Municipal Ordinances in this respect.
What are the steps to obtain permits?
- Consultation at the town hall: The technical works services will tell you the necessary administrative procedures to follow.
- Processing of licences: The building permit procedure must be carried out by a competent technician (architect or technical architect), providing the technical and administrative documentation required by each local council.
- Structural projects: Normally, it is necessary to present a technical project describing the intervention and justifying all the parameters and requirements to be met.
- At historic or heritage buildings, the regulations are usually stricter, and the intervention must be carried out with even more caution, if possible, so as not to affect the rest of the building or even neighbouring buildings.
Approximate cost of demolishing a load-bearing wall
The cost of demolishing a load-bearing wall can vary significantly depending on several factors. According to Javier Fariñas, the price mainly depends on the span that wants to open, meaning the width of the opening in the load-bearing wall.
- For standard homes, with spans of between 3 and 4 metres, the cost can be in the range of 3,500 and 6,000 euros.
- The larger the span, the larger the metal profiles will be, which will increase the cost.
Factors affecting price include:
- Size of the hole to be opened.
- Materials needed (types of profiles to be used, shoring construction process).
- Complexity of the work and municipal permits.
The architect's role in the demolition of a master wall
The role of the architect or technical architect is fundamental in the whole process of demolishing a master wall. They are responsible for:
- Perform technical calculations to ensure that the building is not compromised.
- Supervise structural shoring to ensure its proper implementation.
- Managing licences and the necessary administrative formalities.
Risks of knocking down a master wall without technical supervision
Breaking down a load-bearing wall without proper supervision is one of the biggest mistakes that can be made in a refurbishment. Javier Fariñas warns that without prior studies and the necessary calculations, serious problems can be generated, such as:
- Major cracks in floor slabs and other structural walls.
- Structural displacements which may affect not only the dwelling but also the upper floors.
These risks mean that it is always necessary to have an architect or technical architect supervising every step of the process.
Conclusion
Intervening on a master wall is a process that requires prior planning and analysis, the processing of administrative permits and technical supervision by a qualified professional. The structural stability of the building will depend on the relevant calculations and the implementation of the appropriate technical solutions in each case. If you are considering a reform of this type, it is best to rely on the experience of professionals like ICA-Grupo, they will guide you through the entire process to ensure that it is carried out safely and in compliance with regulations.